FAQ

189 0246 2329
nuokeshebei@163.com
No. 74, Ainan Road,Longdong Community,Longgang District,Shenzhen,China.

FAQ

You are here:Home>News > FAQ

Repair of hot melt adhesive machine need to pay attention to a few points?

Time:2014-09-04 20:40:54Source:SiteViews:554

Maintenance and repair of hot melt adhesive machine, should pay attention to the following points:Before 1 the repair work, you must first cut off the...
Maintenance and repair of hot melt adhesive machine, should pay attention to the following points:
1 Before  the repair work, you must first cut off the power supply of hot melt adhesive machine, shall not be charged operation.
2 in the repair work, workers should not wear conductive decor, prevent accidents.
3 do not remove any parts check and adjust the hot melt glue machine, unless you have the enough understanding of device performance.
4 do not separate disassembly and repair of hot melt adhesive machine equipment, unless there are other people to help in the next.
5 personnel only professional can repair and maintenance of the hot melt glue machine work.
6 in any case, wire connectors do not touch may be exposed to the outside or other wire connection and not loose components.
7 Before replacing components element protection removing or mobile device or hot melt glue machine, you must first cut off the power supply.
8 do not have flooded the floor or very humid environment of hot melt adhesive machine maintenance.
9 on the hot melt glue machine maintenance and repair must wear safety gloves, goggles and long sleeved clothes, avoid body parts are hot melt adhesive scald, burn or element surface temperature.
10 loose or install pressure joint, must determine the pressure gas source pressure of hot melt glue machine has been reduced to zero.
11 cleaning hot melt adhesive glue cylinder, avoid using hard tool fireworks or sharp, so as to avoid scratching the glue barrel internal Teflon non adhesive coating.
12 If the pressure or hot melt glue machine glue leakage, first stop the hot melt glue machine, cut off the power, and the operating pressure reduced to zero and then repair.   
  
  

Hot Melt Machine | Box Sealing Machine | Automation Machine | Guns And Hoses | News| about us |Contact us


Contacts : Mr Hou phone : 189 0246 2329
Fax : 0755-89619956
E-amail : nuokeshebei@163.com
web:cabet900
Adress :No. 74, Ainan Road,Longdong Community,Longgang District,Shenzhen,China.
Copyright 2014 all rights reserved:Shenzhen Nuosheng technology development co., LTD

The Alibaba Website