FAQ

189 0246 2329
nuokeshebei@163.com
No. 74, Ainan Road,Longdong Community,Longgang District,Shenzhen,China.

FAQ

You are here:Home>News > FAQ

How to choose a good hot melt adhesive throat?

Time:2014-09-04 20:42:45Source:SiteViews:479

Hot melt adhesive machine throat inferior is likely to appear in some of the following questions:1 The insulating layer is easy to wear, appear leakag...
Hot melt adhesive machine throat inferior is likely to appear in some of the following questions:
1 The insulating layer is easy to wear, appear leakage phenomenon;
2 insulation sleeve fracture appear leakage phenomenon;
3 The joint rust will appear leakage phenomenon;
4 The throat uneven heating burst;
5 Tube woven cloth gap existing in leakage.

To sum up, or to choose the good quality of hot melt adhesive throat:
First of all, should pay attention to pipe joint material is stainless steel, or other material. The material is easy to rust, leakage;
Secondly, attention should be paid to the heating wire, carbon fiber heating wire, weld uniform heating;
Finally, to see the inner tube knitting, woven to choose precision equipment, otherwise easy leakage leakage.   
  
  

Hot Melt Machine | Box Sealing Machine | Automation Machine | Guns And Hoses | News| about us |Contact us


Contacts : Mr Hou phone : 189 0246 2329
Fax : 0755-89619956
E-amail : nuokeshebei@163.com
web:cabet900
Adress :No. 74, Ainan Road,Longdong Community,Longgang District,Shenzhen,China.
Copyright 2014 all rights reserved:Shenzhen Nuosheng technology development co., LTD

The Alibaba Website